Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the seat on the KTM Duke 790?

Model: Ktm Duke 790
Part: Checks and maintenance

Video tutorial

To replace the seat on the KTM Duke 790, you need to remove the cover from the top of the mudguard by detaching the internal clips. Then, loosen the screws underneath, along with those that secure the seat laterally.

This will allow you to completely detach the seat from its housing so that you can reposition the new one in its place; it should be secured with the appropriate lateral and rear screws. Finally, cover everything with the corresponding panel on the top of the mudguard, fastening it with the clips.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the KTM Duke 790
Duke 790 To replace the air filter on the KTM Duke 790, completely remove the seat from its housing. To do this, detach the upper panel of the rear mudguard s…
How to Replace the Air Filter in a KTM Duke 790?
How to Replace the Air Filter in a KTM Duke 790?
Duke 790 In this tutorial, you will learn how to replace the air filter in a KTM Duke 790, a very simple and quick operation. First, remove the passenger seat…
How to Replace the Battery in a KTM Duke 790
Duke 790 In this tutorial, you will see how to replace the battery in a KTM Duke 790, a very simple and quick operation. First, ensure that the key is not ins…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos