Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Visar
Part: Brake pads

Start by unscrewing the first two bolts that secure the caliper to the brake disc, as shown in the video. Now, using a flat screwdriver, push back the piston that holds the brake pads and remove them. Further expand the housing because, obviously, the new pads will be much thicker than the worn ones you have removed. While you're at it, give the brake caliper a good clean with a brush and a cleaning spray. Insert the new pads and reattach the caliper to the disc by screwing in the bolts. Job done. As you can see, it's a really simple operation.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Kymco Visa R?
How do you replace the clutch of the Kymco Visa R?
Visar In order to replace the clutch of the Kymco Visa R, you need to loosen the screws that fix the transmission casing to its housing, located on the rig…
How do you replace the clutch of the Kymco Visa R?
How do you replace the clutch of the Kymco Visa R?
Visar To replace the clutch on the Kymco Visa R, you will need to loosen the screws that secure the casing located on the right side of the vehicle, immedi…
How to Change the Engine Oil of the Kymco Visa R?
How to Change the Engine Oil of the Kymco Visa R?
Visar To change the engine oil of the Kymco Visa R, loosen the drain plug located at the bottom of the bike to collect the used oil in a suitably placed co…

How to Replace the Horn on a Kawasaki Z800

Follow the main steps to remove and replace the horn or acoustic warning device on the Kawasaki Z800 motorcycle. First, place the bike on a stand and start unscrewing the screws of the horn, located behind the radiator; then disconnect the electrical connector, as shown in the video. At this point, remove and replace the acoustic warning device with the new one, making the connection and checking its operation; then secure it to the bracket behind the cooling radiator, following the video tutorial until the end!

Watch the video!


by ScegliAuto

More videos