|
Do it yourself
| |||
| ||||
Model: Kymco Visar
To change the engine oil of the Kymco Visa R, loosen the drain plug located at the bottom of the bike to collect the used oil in a suitably placed container. Once the oil has completely drained, remove the oil filter located in the same position to insert the new replacement part. After replacing the filter, pour in the new oil through the designated breather located on the right side of the bike, on the relevant casing.
Updated on 26 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Visar
In order to replace the clutch of the Kymco Visa R, you need to loosen the screws that fix the transmission casing to its housing, located on the rig…
Visar
To replace the air filter on the Kymco Visa R, you need to loosen the securing bolts that hold the box containing the filter. This box is located bet…
Visar
In order to replace the battery of the Kymco Visa R 110, you need to loosen the screws that secure the right side panel of the motorcycle, which is l…
|
How to Replace the Tyres on the Husaberg FE 450
In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
