Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this new mini guide for Kymco Downtown owners, discover how to correctly reset the maintenance light independently. It will only take a few seconds to complete the entire procedure. First, insert the key and turn on the ignition. Then, press the "ADJ" button multiple times to navigate the menu and locate the option regarding the remaining kilometres until maintenance. At this point, turn off the ignition and simultaneously press the "ADJ" and "Mode" buttons. Restart the ignition and release the buttons to complete the reset.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Oil Maintenance Light (Service) on Kymco Downtown 350
Resetting the Oil Maintenance Light (Service) on Kymco Downtown 350
Downtown 350 In this short and simple video tutorial, you will find the necessary instructions to reset the service light for the routine oil change on a Kymco Do…
How to change the engine oil of the Kymco Downtown 350?
How to change the engine oil of the Kymco Downtown 350?
Downtown 350 To change the engine oil of the Kymco Downtown 350, loosen the drain plug located at the central lower part of the scooter so that all the used oil c…
How to perform the service on the Kymco Downtown 350
How to perform the service on the Kymco Downtown 350
Downtown 350 Today we will see the instructions that will allow us to perform a complete service on the Kymco Downtown 350 scooter. First of all, we put the scoot…

How to Replace the Spark Plug on the Sym CruiSym 300

In this short and simple guide, you will learn how to remove and replace the engine spark plug on the Sym CruiSym 300, following the instructions below. First, place your scooter on the centre stand and begin by removing the under-seat compartment to access the upper part of the engine. Then, disconnect the spark plug connector, using a socket wrench with an extension to unscrew and remove it, as shown in the video. At this point, install the new spark plug of the correct type and thread pitch, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos