Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on a Kymco Super 8

Model: Kymco Super 8 150
Part: Engine oil

Video tutorial

Here are the step-by-step instructions to perform the routine maintenance service by changing the engine oil and oil filter on the Kymco Super 8 scooter. First, place your scooter on the centre stand and start by undoing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then, remove the filler cap to speed up the oil drainage, as shown in the video.

Finally, pour in the new engine oil of the correct type (in this case, 15W40), adding approximately 900 ml of oil!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Super 8 150 Today we will discover the steps necessary to replace the engine oil, performing the routine maintenance check of the Kymco Super 8 150 scooter. Firs…
Super 8 150 This tutorial shows how to change the transmission oil on a Kymco Super 8 150 scooter, a very simple and quick operation. First, ensure the engine is…
Super 8 150 To replace the clutch of the Kymco Super 8 150, you need to loosen the screws that secure the transmission cover, which is located near the rear whee…

How to Replace the Air Filter on the Triumph Tiger 1200

Through these simple steps, you will see how to remove and replace the engine air filter on the Triumph Tiger 1200. First, place the motorcycle on its centre stand and begin to remove the fuel tank; then disconnect the fuel hose and unscrew the fixing screws to remove it, as shown in the video. At this point, unscrew the screws of the air filter box cover, removing and replacing the cartridge with the new one; insert it in the correct orientation and reassemble the filter box, then reinstall the fuel tank. Start the engine!

Watch the video!


by ScegliAuto

More videos