Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. :
  3. People 150
    4. : How to replace the oil filter on the Kymco People 150?

Model: Kymco People 150
Part: Oil filter
How to replace the oil filter on the Kymco People 150?

In order to replace the oil filter of the Kymco People 150 you have to go to the lower part of the bike, immediately in front of the rear wheel. Here there will be the oil tank drain plug, which must be unscrewed with the appropriate wrench in order to extract the oil filter inside it. Once the old filter has been removed, it will be possible to insert the new one, sealing the tank with the previously removed drain plug. Finally, it will be possible to top up the oil by pouring it from the special top up duct.


Posted on 21 September 2022 by ScegliAuto

How to change the motor oil of a Harley Davidson Shovelhead?

To change the oil of a Harley Davidson Shovelhead, start by warming up the engine for a few minutes to make the oil more fluid and facilitate drainage. Park the motorcycle on a flat and stable surface and turn off the engine. Place a container for collecting the oil under the drain plug of the crankcase. Use a wrench to loosen the drain plug and let the old oil drain completely. Once the oil has drained, clean the drain plug and washer, then put the plug back in place and tighten it carefully. Remove the oil tank cap and use a funnel to slowly pour the new oil into the tank, making sure to use the type and quantity specified in the owner's manual. After adding the oil, replace the oil tank cap and start the engine for a few minutes to circulate the new oil. Turn off the engine and check the oil level, adding more if necessary. Check for any leaks around the drain plug before resuming riding.

Watch the video!


by ScegliAuto

More videos