Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Drive Belt on the Kymco Super 8 150

Model: Kymco Super8 150
Part:

Video tutorial

This guide provides the main instructions on how to remove and replace the drive belt on the Kymco Super 8 scooter, following these simple steps. First, place the scooter on the centre stand and begin unscrewing the fixing screws of the transmission cover to remove it; then unscrew the central nut of the fan, also removing the clutch bell, as shown in the video.

At this point, remove the drive belt and install the new original one; now reassemble everything by applying the reverse procedure!


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Kymco Super8 150
How to Change the Engine Oil of the Kymco Super8 150
Super8 150 Below are the main instructions that will allow you to carry out the routine maintenance service by replacing the engine oil of the Kymco Super8 scoo…
How to Change the Gear Oil on a Kymco Super8 150
How to Change the Gear Oil on a Kymco Super8 150
Super8 150 In today’s video tutorial, you will see the main steps to remove and replace the gear oil on the Kymco Super8 150 scooter, as well as the 125. First,…

How to Dismantle the Carburettor of the Aprilia Scarabeo 150

Today's guide will illustrate the main steps for dismantling and replacing the carburettor on the Aprilia Scarabeo 150 scooter. First, place your scooter on the centre stand and begin by removing the plastic cover located under the seat. Then, disconnect the fuel hose from the carburettor and the throttle cable, as shown in the video. At this point, loosen the screw of the air filter box clamp and that of the intake manifold; then remove the carburettor, performing cleaning or replacement as necessary!

Watch the video!


by ScegliAuto

More videos