Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Kymco Downtown 125

Model: Kymco Downtown 125
Part: Engine oil

Video tutorial

This guide will briefly illustrate how to perform the routine maintenance service by replacing the engine oil and oil filter of the Kymco Downtown 125 scooter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew and remove the oil filter cartridge, replacing it with a new one as shown in the video.

At this point, unscrew the filler cap and top up with new engine oil suitable for your engine!


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Gear Oil of the Kymco Downtown 125
How to Change the Engine Oil and Gear Oil of the Kymco Downtown 125
Downtown 125 Below are the instructions needed to perform the routine maintenance service, replacing the engine oil, oil filter, and gear oil of the Kymco Downtow…
How to Perform an Oil Change Service on the Kymco Downtown 125
How to Perform an Oil Change Service on the Kymco Downtown 125
Downtown 125 In this short video, see how to carry out the routine maintenance oil change service on the Kymco Downtown 125 scooter. First, position the central s…
How to Replace the Clutch on a Kymco Downtown 125?
How to Replace the Clutch on a Kymco Downtown 125?
Downtown 125 To replace the clutch on the Kymco Downtown 125, loosen the screws that secure the cover located on the left side of the bike, near the rear wheel. O…

How to Dismantle the Engine of the Gilera SP 02?

To dismantle the engine of the Gilera SP 02, loosen the bolts securing the engine block to its housing to free it. You will also need to disconnect the intake and exhaust manifolds by unplugging their respective connectors. At this point, remove the cylinder and cylinder head, detaching the piston from the corresponding connecting rod. This will give you access to the crankshaft, allowing you to replace all necessary components. Finally, reassemble the engine, ensuring everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos