Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Gear Oil of the Kymco Downtown 125

Model: Kymco Downtown 125
Part: Engine oil

Video tutorial

Below are the instructions needed to perform the routine maintenance service, replacing the engine oil, oil filter, and gear oil of the Kymco Downtown 125 scooter. First, place the scooter on its central stand and start unscrewing the engine oil drain bolt, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, replacing the cartridge with a new one. At this point, also replace the gear oil by unscrewing the transmission cover screw, and finally top up!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Kymco Downtown 125
How to replace the engine oil and oil filter of the Kymco Downtown 125
Downtown 125 This guide will briefly illustrate how to perform the routine maintenance service by replacing the engine oil and oil filter of the Kymco Downtown 12…
How to Perform an Oil Change Service on the Kymco Downtown 125
How to Perform an Oil Change Service on the Kymco Downtown 125
Downtown 125 In this short video, see how to carry out the routine maintenance oil change service on the Kymco Downtown 125 scooter. First, position the central s…
How to Reset the Oil Service Light on the Kymco DownTown 125i
How to Reset the Oil Service Light on the Kymco DownTown 125i
Downtown 125 This video shows how to reset the oil maintenance light on the Kymco DownTown 125i. This procedure is necessary after performing an oil change, and i…

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos