Do it yourself
| ||||
|
Model: Kymco Like 150i
In order to replace the spark plug of the Kymco Like 150i, you need to lift the seat in order to access the components located inside the underseat compartment. This compartment will need to be completely removed by unscrewing the screws that hold it in the front and back. After removing the compartment, you can also unscrew the screws that hold the protective panel located immediately behind the footrest compartment. The spark plug will be located right under this panel and can be removed by disconnecting it from the ignition coil. After removal, you can insert the new spark plug and reassemble all the previously removed components.
Posted on 11 August 2023 by ScegliAuto
|
Guide to disassembling the fuel pump on the Yamaha Majesty 400In this guide we will see the main instructions for disassembling and replacing the fuel pump on the Yamaha Majesty 400 scooter. First of all, let's disassemble the seat and all the compartment under the seat of the scooter, in order to access the upper part of the engine; after which we unscrew the bolts of the tank and the screws of the engine support frame, lifting it from below with a jack. At this point we lift the engine and unscrew the bolts of the fuel pump, disconnecting the electrical connector and the petrol pipe; so let's replace it with the new one, applying the reverse procedure! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |