Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Kymco Downtown

Model: Kymco Downtown 125
Part: Service warning light

Video tutorial

Resetting the service light on the Kymco Downtown scooter is a simple procedure that can be done independently, thanks to our short video tutorial. Start by inserting the key into the ignition and turning on the instrument panel.

Continue by pressing the ADJ button until the service trip meter appears on the display. Finish by turning off the ignition and pressing both the MODE and ADJ buttons while turning the ignition back on; after a few seconds, the maintenance light will be reset.

If necessary, you can repeat the reset operation.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on the Kymco DownTown 125i
How to Reset the Oil Service Light on the Kymco DownTown 125i
Downtown 125 This video shows how to reset the oil maintenance light on the Kymco DownTown 125i. This procedure is necessary after performing an oil change, and i…
How to Service the Kymco Downtown 125cc
How to Service the Kymco Downtown 125cc
Downtown 125 In today's tutorial, you will learn how to service the Kymco Downtown 125cc scooter by changing the engine oil and spark plug. First, position the sc…
How to Perform an Oil Change Service on the Kymco Downtown 125
How to Perform an Oil Change Service on the Kymco Downtown 125
Downtown 125 In this short video, see how to carry out the routine maintenance oil change service on the Kymco Downtown 125 scooter. First, position the central s…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos