Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Time on Kymco Agility 150 Scooter?

Model: Kymco Agility 150
Part: Clock

Video tutorial

In this tutorial, you will learn how to set the time on the Kymco Agility 150 scooter, a very simple and quick operation, for example after a time change or after replacing the battery. First, insert the key, then turn on the ignition and press both dashboard buttons for about 3 seconds, or until the clock starts to flash.

At this point, adjust the hour using the right button, switch to minutes with the left button, and adjust them in the same way. To save the setting, simply restart the ignition.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Agility 150 To replace the transmission on a Kymco Agility 150, loosen the screws securing the transmission cover to its housing: this is located near the rear w…
Agility 150 Today with the help of this video tutorial we will illustrate the steps to follow to remove the rear wheel of the Kymco Agility 150. To perform this …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Engine Oil on a Suzuki Bandit GSF 600?

To change the engine oil on a Suzuki Bandit GSF 600, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and securely position the bike on the centre stand. Under the engine, locate the oil drain plug. Place a container under the plug to collect the used oil. Use an appropriate spanner to unscrew the drain plug and let the oil drain completely into the container. Once all the oil has drained, clean the plug and its gasket, then screw it back on tightly. Remove the oil filler cap located on the side of the engine and insert a clean funnel. Slowly pour in the recommended amount of oil as stated in the owner's manual. After adding the oil, screw the filler cap back on. Start the engine and let it run for a few minutes, then turn it off and check the oil level using the dipstick. Add more oil if necessary to reach the correct level. Dispose of the used oil properly at an authorised collection centre.

Watch the video!


by ScegliAuto

More videos