Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on the Aprilia RS 660, loosen the screws that secure it to its mounts on the right side of the bike: once the screws for the mounts have been loosened, you can then loosen the ring that secures the exhaust to the remaining exhaust pipe by removing the corresponding screw. After disconnecting the last sensors, you can completely remove the old exhaust to replace it with a new one: the new exhaust must be secured to the corresponding mounts with screws and connected to the remaining part of the exhaust pipe.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Rs 660 To replace the exhaust of the Aprilia RS 660, loosen the screws that secure it to its supports on the right side of the bike: once the support screws…
Rs 660 The operation of replacing the exhaust on the Aprilia RS 660 involves loosening the screws that hold it to the respective supports on the right side …
Rs 660 The exhaust pipe installed on the Aprilia RS 660 can be replaced by loosening the screws that attach it to the respective supports on the right side …

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos