Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Aprilia RS 660?

Model: Aprilia Rs 660
Part: Exhaust muffler

Video tutorial

The exhaust pipe installed on the Aprilia RS 660 can be replaced by loosening the screws that attach it to the respective supports on the right side of the motorcycle: once the screws of these supports have been loosened, it will be possible to remove the screw that secures the exhaust pipe to the remaining exhaust duct, through the appropriate connecting clamp.

Then, by disconnecting the last sensors, the old exhaust pipe can be completely removed so that it can be replaced with a new one: the latter can be connected to the sensors, attached to the remaining part of the exhaust duct and fixed by verifying that everything is functioning properly.


Posted on 13 July 2025 by ScegliAuto


Related tutorials

How to replace the exhaust on the Aprilia RS 660?
How to replace the exhaust on the Aprilia RS 660?
Rs 660 To replace the exhaust on the Aprilia RS 660, loosen the screws that secure it to its mounts on the right side of the bike: once the screws for the m…
How to Replace the Exhaust of the Aprilia RS 660?
How to Replace the Exhaust of the Aprilia RS 660?
Rs 660 To replace the exhaust of the Aprilia RS 660, loosen the screws that secure it to its supports on the right side of the bike: once the support screws…
How to Replace the Exhaust on the Aprilia RS 660?
How to Replace the Exhaust on the Aprilia RS 660?
Rs 660 To replace the exhaust on the Aprilia RS 660, loosen the bolts securing it to the supports on the right side of the bike. Once these bolts are loosen…

How to Change the Engine Oil on the BMW C400GT Scooter

In this tutorial, see how to change the engine oil on the BMW C400GT scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool for safe operation, then position a container under the scooter, locate the drain hole bolt, and remove it using a 17mm socket. Allow all the oil in the system to drain out, then unscrew the old filter and tighten both the replacement and the bolt. At this point, simply pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos