How to change the engine oil of an Aprilia RS 660?

Model: Aprilia Rs 660
Part: Engine oil

This video is currently unavailable

To change the engine oil of an Aprilia RS 660, start by lifting the bike and placing it on a stable stand. Remove the oil filler cap located above the engine to aid drainage.

Unscrew the drain plug on the engine casing and allow the used oil to completely drain into a suitable container. Once the oil has fully drained, replace the drain plug and tighten it properly.

Remove the oil filter, located near the engine, using a suitable tool, and replace it with a new one. Fill the engine with new oil, following the specifications recommended in the bike's manual. Check the oil level using the dipstick, and finally, replace the filler cap. Start the engine for a few minutes, check for leaks, and ensure the oil level is correct.

Updated on 11 November 2026 by ScegliAuto

How to Replace the Front Shock Absorber Seals on a Derbi Senda?

To replace the front shock absorber seals on a Derbi Senda, completely remove the shock absorber by undoing the bolts that secure it to the steering and then those that attach it to the corresponding front wheel. Once the shock absorber is fully removed, disconnect the piston from the hollow cylinder at the bottom of the shock absorber. Now the seal will be accessible, and you can remove it from its housing using a lever tool; finally, insert the new seals and reassemble the shock absorber.

Watch the video!

by ScegliAuto

How to change the engine oil of an Aprilia RS 660?

Related tutorials

How to Replace the Front Shock Absorber Seals on a Derbi Senda?

More videos