Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Shock Absorber Seals on a Derbi Senda?

Model: Derbi Senda 125
Part: Shocks

Video tutorial

To replace the front shock absorber seals on a Derbi Senda, completely remove the shock absorber by undoing the bolts that secure it to the steering and then those that attach it to the corresponding front wheel. Once the shock absorber is fully removed, disconnect the piston from the hollow cylinder at the bottom of the shock absorber.

Now the seal will be accessible, and you can remove it from its housing using a lever tool; finally, insert the new seals and reassemble the shock absorber.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

Senda 125 Today, we will see, in this brief guide, the main instructions that will allow us to replace the oil in the front forks of the Derbi Senda enduro mot…
Senda 125 This guide briefly explains the instructions to reset the maintenance light for the oil change on the Derbi Senda. First, place your bike on a stand …
Senda 125 In this video, you will see how to replace the radiator fluid on a Derbi Senda or DRD, following the instructions below. First, remove the seat by ta…

How to Set the Time on the Suzuki V-Strom 650?

In this tutorial, learn how to set the time on the Suzuki V-Strom 650, a simple and quick operation, for instance, after replacing the battery or switching to daylight saving time. First, insert the key, then turn on the instrument cluster and press both the "MODE" button upwards and the button to the left of the speedometer. Wait for the time to start flashing, release both buttons, and adjust the clock using the button on the dashboard. To save the setting, wait a few seconds.

Watch the video!


by ScegliAuto

More videos