Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Triumph Street Triple R

Model: Triumph Street Triple R
Part: Air filter

Video tutorial

In today's tutorial, you will see the steps to remove and replace the engine air filter on the Triumph Street Triple R motorcycle. First, place your bike on a stand and start by removing the seat; then, unscrew all the fastening screws of the fuel tank, disconnecting the electrical connector and the fuel hose.

Once the tank is removed, take off the plastic cover of the filter box, extracting and replacing the air filter with the new one; insert it in the correct orientation and refit the fuel tank and the seat!


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Triumph Speed Triple RS?
How to Replace the Air Filter on the Triumph Speed Triple RS?
Street Triple R To replace the air filter on the Triumph Speed Triple RS, loosen the screws securing the fuel tank to its housing. Once the tank screws are loosened,…
How to Remove the Rear Wheel of the Triumph Street Triple
How to Remove the Rear Wheel of the Triumph Street Triple
Street Triple R This guide provides instructions for removing and replacing the rear wheel or tyre of the Triumph Street Triple. First, place the rear stand to lift …
How to change the engine oil in the Triumph Street Triple R?
How to change the engine oil in the Triumph Street Triple R?
Street Triple R In this tutorial, you will see how to change the engine oil in the Triumph Street Triple R, a very simple and quick operation to perform every 12 mon…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos