Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of the Triumph Street Triple

Model: Triumph Street Triple R
Part: Wheel

Video tutorial

This guide provides instructions for removing and replacing the rear wheel or tyre of the Triumph Street Triple. First, place the rear stand to lift the wheel off the ground.

Next, unscrew the central wheel bolt using a 34 mm socket spanner, as shown in the video. At this point, disconnect the drive chain and gently remove the wheel spindle, also carefully removing the brake caliper.

If necessary, replace the tyre and reassemble everything by following the reverse procedure!


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Triumph Street Triple?
How to Replace the Battery of the Triumph Street Triple?
Street Triple R To replace the battery of the Triumph Street Triple, loosen the screws located under the seat padding at the rear. Once these are removed, you can co…
How to Remove the Fuel Tank on the Triumph Street Triple R?
How to Remove the Fuel Tank on the Triumph Street Triple R?
Street Triple R In this tutorial, see how to remove the fuel tank on the Triumph Street Triple R, a very simple and quick operation. First, remove the seat. Then, us…
How do you replace the headlight bulb of the Triumph Street Triple?
How do you replace the headlight bulb of the Triumph Street Triple?
Street Triple R The replacement of the headlight bulb of the Triumph Street Triple can be done by loosening the screws that secure the corresponding headlight: these…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos