Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight bulb of the Triumph Street Triple?

Model: Triumph Street Triple R
Part: Headlight bulb

Video tutorial

The replacement of the headlight bulb of the Triumph Street Triple can be done by loosening the screws that secure the corresponding headlight: these screws will be located at the bottom of the headlight assembly, which can then be completely removed by disconnecting the connectors inside.

Once the headlight is removed, the old bulb can be removed from the back in order to insert the new one: this must be connected and inserted to secure the headlight again and verify that everything is functioning properly.


Posted on 26 July 2025 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Triumph Speed Triple R
Street Triple R To replace the headlight bulb on the Triumph Speed Triple R, loosen the screws that secure the headlamp unit to its housing: these screws are located…
How to Remove the Rear Wheel of the Triumph Street Triple
How to Remove the Rear Wheel of the Triumph Street Triple
Street Triple R This guide provides instructions for removing and replacing the rear wheel or tyre of the Triumph Street Triple. First, place the rear stand to lift …
How to Replace the Battery of the Triumph Street Triple?
How to Replace the Battery of the Triumph Street Triple?
Street Triple R To replace the battery of the Triumph Street Triple, loosen the screws located under the seat padding at the rear. Once these are removed, you can co…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos