Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the Triumph Street Triple R?

Model: Triumph Street Triple R
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Triumph Street Triple R, a very simple and quick operation to perform every 12 months. First, ensure the engine is sufficiently cool, then position a container underneath the bike, locate the drain bolt, and unscrew it using a Torx T50 key. Allow all the oil in the system to drain out, unscrew the old filter using pliers, and tighten both the new filter and the bolt.

At this point, simply pour in the new oil through the designated hole.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Wheel of the Triumph Street Triple
How to Remove the Rear Wheel of the Triumph Street Triple
Street Triple R This guide provides instructions for removing and replacing the rear wheel or tyre of the Triumph Street Triple. First, place the rear stand to lift …
How to Replace the Battery of the Triumph Street Triple?
How to Replace the Battery of the Triumph Street Triple?
Street Triple R To replace the battery of the Triumph Street Triple, loosen the screws located under the seat padding at the rear. Once these are removed, you can co…
How to Replace the Air Filter on the Triumph Street Triple R
How to Replace the Air Filter on the Triumph Street Triple R
Street Triple R In today's tutorial, you will see the steps to remove and replace the engine air filter on the Triumph Street Triple R motorcycle. First, place your …

How to Reset the Service Light on a KTM Super Duke 1290 R

This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you have completed the required scheduled maintenance. Start by inserting the key and turning on the instrument panel, then navigate to the general menu, move the selector to "Options" and press the two indicated buttons. Adjust the two intervals using the directional arrows, return to the main screen, and restart the panel to verify that the reset was successful.

Watch the video!


by ScegliAuto

More videos