Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Lada Kalina

Model: Lada Kalina MK 1 - Years 2004-2013
Part: Engine oil

Let's find out how to replace the Lada Kalina engine oil and oil filter by following the instructions below. First of all we lift the car and start unscrewing the oil vent bolt that we find under the engine, letting it drain in a container for about ten minutes; after which we are going to unscrew and replace the oil filter cartridge with the new one, screwing it by hand and then tightening it with a wrench. Finally we open the bonnet and unscrew the filler cap, pouring in the new oil (having the characteristics indicated in the use and maintenance booklet).

Posted on 2 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter in the Lada Kalina?
How to replace the air filter in the Lada Kalina?
Lada Kalina (2013-2018 / MK 2) Replacing the air filter in the Lada Kalina is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, we w…
How to replace the cabin filter in the Lada Kalina?
How to replace the cabin filter in the Lada Kalina?
Lada Kalina (2013-2018 / MK 2) In this tutorial we can see how to replace the cabin filter in the Lada Kalina, a very simple operation. We start by removing the caps of the protect…
How to replace the air filter on the Lada Kalina
How to replace the air filter on the Lada Kalina
Lada Kalina (2013-2018 / MK 2) To replace the car engine air filter, it is necessary to follow the following simple steps: open the engine hood and locate the box containing the fi…

Other guides you may be interested in

How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series

How to remove the driver's side airbag (steering wheel) on a BMW 3 Series? This operation is very simple if you follow the steps. Let's see in this guide how to proceed: insert a medium-length screwdriver into the rear slots on the steering wheel and turn until you release the clips that hold the airbag. Once the airbag is disconnected, disconnect the power connectors and remove it from the steering wheel. For reinstalling the airbag: connect the power connector, then press it onto the steering wheel until the locking clips snap into place inside the steering wheel.

Watch the video!


by ScegliAuto

More videos