Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on the Renault Kangoo?

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Oil filter

In DIY vehicle maintenance, the most common task is replacing the engine oil and its filter, as it does not require particular technical skills or specific tools. The attached video features a Renault Kangoo for which the aforementioned oil has been replaced, specifying how to replace the filter, either using a chain wrench to unscrew it or, in its absence, puncturing it with a screwdriver and unscrewing it by leveraging on the screwdriver. It is important to remember that before installing the new filter, the gasket at its base must be lubricated.

Posted on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Engine Oil and Oil Filter on a Renault Kangoo 1.2 Petrol
Replacing Engine Oil and Oil Filter on a Renault Kangoo 1.2 Petrol
Renault Kangoo (1997-2008 / MK 1, KC, KW) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Renault Kangoo 1.2 Petrol. First, lift the vehicle and remov…
How to Replace the Engine Oil Filter on a Renault Kangoo
How to Replace the Engine Oil Filter on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Before you start, open the bonnet of your Renault Kangoo. First, remove the engine oil dipstick. Next, lift the vehicle. Position a container under t…
How to Replace the Engine Oil Filter on a Renault Kangoo
How to Replace the Engine Oil Filter on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Before you begin, put the vehicle in first gear and engage the handbrake on your Renault Kangoo, then lift the front of the vehicle. Begin by placing…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos