Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Renault Kangoo 1.5 dCi

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Oil filter

See other generations:
Video tutorial

The maintenance warning indicated on the dashboard tells you that it is necessary to replace the engine oil and oil filter; let's see the procedure for the Renault Kangoo 1.5 dCi. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then lower the vehicle and unscrew the oil filter cartridge using the appropriate tool, replacing it with the new one, as shown in the video.

Now unscrew the filler cap and top up with the correct amount of engine oil, finally checking the level using the dipstick.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How to Change Oil and Filter on a Renault Kangoo II
How to Change Oil and Filter on a Renault Kangoo II
Renault Kangoo (2007-2021 / MK 2, FC, FW) Learn how to change the oil and filter on a Renault Kangoo II: Warm up the engine (hot oil drains better), lift the car on axle stands, unscrew the d…
Replacing Engine Oil and Oil Filter on a Renault Kangoo 1.2 Petrol
Replacing Engine Oil and Oil Filter on a Renault Kangoo 1.2 Petrol
Renault Kangoo (1997-2008 / KC, MK 1, KW) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Renault Kangoo 1.2 Petrol. First, lift the vehicle and remov…
How to Replace the Engine Oil Filter on a Renault Kangoo
How to Replace the Engine Oil Filter on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Before you start, open the bonnet of your Renault Kangoo. First, remove the engine oil dipstick. Next, lift the vehicle. Position a container under t…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos