|
Do it yourself
| |||
| ||||
How to Change Oil and Filter on a Renault Kangoo II
Model: Renault Kangoo
MK 2, FC, FW
- Years 2007-2021
Learn how to change the oil and filter on a Renault Kangoo II: Warm up the engine (hot oil drains better), lift the car on axle stands, unscrew the drain plug (under the sump, 13 or 16 mm socket depending on the model) and let it drain into a suitable container; dispose of the used oil along with the filter at an authorised centre. Refit the plug with a new gasket (torque: 25-30 Nm) and remove the oil filter, which is located on the front side of the engine; on the 1.5 dCi, the filter is in a cartridge housing, where you simply unscrew the cover, remove the old cartridge and gasket, clean the seat, insert the new cartridge and gasket (lubricated with oil) and screw it back on by hand. Add oil: 1.5 dCi: about 4.5 – 5.0 litres, then start the engine for 1 minute (to circulate the oil); turn off and wait 2 minutes, then check the dipstick (it should be between MIN and MAX).
Posted on 10 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
In this brief video, you will see how to change the engine oil and oil filter on your Renault Kangoo. It is not a complex task; just be careful and y…
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
This video clearly shows how to change the engine oil in a Renault Kangoo. If you want to proceed with this DIY maintenance, gather the right tools, …
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
In this video tutorial, you will learn how to replace the engine oil and oil filter on a Renault Kangoo 1.2 Petrol. First, lift the vehicle and remov…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.080
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |