Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Kangoo
    4. : Replacement engine oil and oil filter Renault Kangoo 1.2 Petrol

Renault Kangoo - Video tutorial

Model: Renault Kangoo KW, KC, MK 1 - Years 1997-2008
Part: Oil filter
Operation: Replacement engine oil and oil filter Renault Kangoo 1.2 Petrol

Let's see in this video tutorial how to replace the engine oil and oil filter on a Renault Kangoo 1.2 Petrol. First of all we lift the car and go to remove the oil vent bolt, unscrewing it with a socket wrench; after which we drain all the oil in a container and then we go to unscrew the oil filter, which we find next to the oil pan. At this point we insert the new filter, screwing it by hand, and close the oil drain plug; we just have to pour in the new engine oil and fill up to the maximum level!


Posted on 1 January 2024 by ScegliAuto



How to replace the engine oil filter on a Renault Kangoo?
Renault Kangoo (1997-2008 / KW, KC, MK 1) Before starting, we will have to engage the first gear and activate the parking brake of our Renault Kangoo, and then raise the front of our car. So
How to replace engine oil and oil filter on a Renaul Kangoo
Renault Kangoo (1997-2008 / KW, KC, MK 1) Today in this short video we are going to see how to change the oil and the engine filter on our Renault Kangoo, it is not a very complex operation,
How to replace the engine oil filter on a Renault Kangoo
Renault Kangoo (1997-2008 / KW, KC, MK 1) Before we can start, we will have to go and open the front hood of our Renault Kangoo. So let's start by pulling out and removing the engine oil dips

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos