Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Filter on a Renault Kangoo

Model: Renault Kangoo KC, MK 1, KW - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Engine oil

See other generations:
Video tutorial

To replace the engine oil filter on a Renault Kangoo 1, open the bonnet and safely lift the vehicle, placing a container under the oil sump. Unscrew the drain plug and allow the used oil to completely drain out. Locate the oil filter on the engine and unscrew it using a suitable tool, being careful of any residual oil that may spill out. Before installing the new filter, lightly lubricate the seal with clean oil. Screw the filter on by hand until it is snug without over-tightening.

Close the sump plug, fill the engine with new oil of the specified grade, and start the engine to check for leaks.


Posted on 29 April 2026 by ScegliAuto


Related tutorials

Replacing Engine Oil and Oil Filter on a Renault Kangoo 1.2 Petrol
Replacing Engine Oil and Oil Filter on a Renault Kangoo 1.2 Petrol
Renault Kangoo (1997-2008 / KC, MK 1, KW) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Renault Kangoo 1.2 Petrol. First, lift the vehicle and remov…
How to Change the Oil in a Renault Kangoo 1?
How to Change the Oil in a Renault Kangoo 1?
Renault Kangoo (1997-2008 / KC, MK 1, KW) This video clearly shows how to change the engine oil in a Renault Kangoo. If you want to proceed with this DIY maintenance, gather the right tools, …
How to Replace the Engine Oil and Oil Filter of the Renault Kangoo 1.5 dCi
How to Replace the Engine Oil and Oil Filter of the Renault Kangoo 1.5 dCi
Renault Kangoo (2007-2021 / MK 2, FC, FW) The maintenance warning indicated on the dashboard tells you that it is necessary to replace the engine oil and oil filter; let's see the procedure f…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos