Do it yourself
Frequently asked questions about cars and motorcycles

How to Revive the Black Parts of a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011

Learn how to restore the black colour of the plastic under the windscreen of a Lancia Ypsilon. Remove it using three simple Torx screws, then take out the two rivets. Next, remove the two wipers to take off the piece and work on it comfortably. Be careful of the plastic clips at the front and the water pipe. Now, clean the entire piece thoroughly, then apply a suitable product - which can be obtained for a few pounds from one of the major e-commerce platforms - ensuring it covers every surface well and gets into the crevices. Once dry, refit it by reversing the entire procedure.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) How do you fit a rear bumper on a Lancia Ypsilon? Let's see how to proceed; it's not too complex if done methodically. First, grab the bumper and pos…
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this new guide, we will help you identify in a few simple steps the fuse box located inside your second edition Lancia Ypsilon. First of all, ente…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos