Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light Bulb from a Lancia Ypsilon

Model: Lancia Ypsilon MK 2, Ypsilon 2, 843, Y2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part:

Video tutorial

Before you begin, open the rear boot lid of your Lancia Ypsilon. Start by prising out the two rubber plugs.

This will give you access to the two clips securing the third brake light. Press these two clips to release the third brake light.

At this point, you can slightly open the boot lid and pull out the third brake light. To remove it completely, simply disconnect the rear connector.

Once done, you will have access to the blown bulb. To remove it, simply pull it out, and you will have successfully completed the removal.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Remove the Third Brake Light on a Lancia Ypsilon
How to Remove the Third Brake Light on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, Ypsilon 2, 843, Y2) Replace the central stop light on a Lancia Ypsilon, as shown in this video: open the boot lid, and using a screwdriver, unscrew the securing screws o…
Replacing Front Headlight Bulb on Lancia Ypsilon
Replacing Front Headlight Bulb on Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, Ypsilon 2, 843, Y2) In this video, you will learn how to remove and replace the front headlight bulb on a second series Lancia Ypsilon. First, open and lift the bonnet; …
Replacement of the license plate lights of the Lancia Ypsilon
Replacement of the license plate lights of the Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Ypsilon 3, 846, Y3) Today we will discover the main instructions that will allow us to disassemble and replace the license plate bulbs of the Lancia Ypsilon, in simple a…

How to Replace the Cabin Filter on the Ford Puma

To replace the cabin filter on the Ford Puma, detach the small cover located on the left side of the front passenger footwell: once this is removed, loosen the underlying screw so that you can detach the corresponding panel. At this point, locate the filter box underneath, which can be opened to remove the filter inside. The new filter can then be inserted, covering everything with the box and refitting the corresponding panel into its housing.

Watch the video!


by ScegliAuto

More videos