Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
Y2, 843, Ypsilon 2, MK 2
- Years 2003-2011 In this video tutorial we will see how to remove and then replace the rear third brake light bulbs of a Lancia Ypsilon. First of all, let's disassemble the terso stop: to do this we open the tailgate of the luggage compartment and with a plastic lever we go to remove the two rubber pads; we will see that inside there are two blades that we will press from the inside and by pushing we will release the third stop from the outside. Then we disconnect the electrical connector by pressing the tab and definitively remove the third stop. We press the tabs separating the ceiling light and then change the bulbs!
Posted on 24 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the fuel cap on Volkswagen Polo 5 (6R)In this video tutorial we will see how to open the cap and the fuel flap on Volkswagen Polo 6R, fifth series, by following these simple steps. First of all we go to open the car with the remote control, in order to unlock all the car locks; after which we go to press on the left side of the flap, in order to unlock the actuator and open it, as shown in the video. At this point we are going to unscrew the fuel cap to refuel; once finished the same we can screw the cap and finally close the fuel flap! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |