Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Third Brake Light on a Lancia Ypsilon

Model: Lancia Ypsilon Y2, MK 2, 843, Ypsilon 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tail light

See other generations:
Video tutorial

Replace the central stop light on a Lancia Ypsilon, as shown in this video: open the boot lid, and using a screwdriver, unscrew the securing screws of the plastic light unit located in the tailgate above the rear window. Once the rear light unit is removed, gently pull the bulb out with your fingers.

Fit the new bulb (same size and voltage) into the new light unit, and reattach the light unit to the tailgate. Finally, test the correct operation of the previously installed bulb.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Remove the Third Brake Light Bulb from a Lancia Ypsilon
How to Remove the Third Brake Light Bulb from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Before you begin, open the rear boot lid of your Lancia Ypsilon. Start by prising out the two rubber plugs. This will give you access to the two clip…
Replacing the Third Brake Light Bulbs in a Lancia Ypsilon
Replacing the Third Brake Light Bulbs in a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) In this video tutorial, you will learn how to remove and replace the bulbs of the third brake light in a Lancia Ypsilon. First, remove the third brak…
Where is the horn located on a 2016 Lancia Ypsilon?
Where is the horn located on a 2016 Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) Do you have a 2016 Lancia Ypsilon and want to know where the horn is located? The creator of this video can clear up all your doubts and answer your …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos