Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to replace the rear light bulb in the Lancia Ypsilon

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y1, 840, MK 1, Ypsilon 1 - Years 1996-2003
Part: Light bulb
Operation: How to replace the rear light bulb in the Lancia Ypsilon

In today's video, we will see how to replace the rear bulbs in the first series Lancia Ypsilon. First of all, let's get the bulbs that we need to replace. You can find the correct bulbs inside the owner's manual and maintenance manual provided with the car. We can then proceed by opening the rear hood. Remove the cover inside the compartment and access it. Disconnect the power connector, then remove the exhausted bulb. Test the new unit to see if it works properly and then proceed with reassembly following the steps previously performed.


Posted on 6 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Ypsilon 2011-2023 - What does the yellow warning light with a bulb in the Lancia Ypsilon mean? Read Answer
    • Ypsilon 2011-2023 - How to replace the parking light bulb in the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - How do you replace the position lights on the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - What bulbs does the Lancia Ypsilon fit? Read Answer
    • Ypsilon 2003-2011 - How to replace the position light bulb on the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - Which bulbs to use for the position lights of the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - How do you replace the position lights on the Lancia Ypsilon? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos