Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the side bulb of a Lancia Ypsilon

Model: Lancia Ypsilon 840, Y1, Ypsilon 1, MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Side marker bulb

See other generations:
Video tutorial

In this very useful tutorial, we are shown how to replace the side turn signal bulb of a first-generation Lancia Ypsilon. This procedure is very simple and we can do it independently.

First, we remove the side turn signal by applying pressure and pushing it towards the back of the car, then we rotate the bulb holder counterclockwise to detach it from the structure of the turn signal and finally remove the old bulb from the bulb holder.

Once this is done, we can install a new bulb and reassemble everything by following the reverse procedure.


Posted on 16 December 2024 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on a Lancia Ypsilon
Replacing the Front Headlamp Bulb on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) In today's tutorial, you will see how to remove and replace the front headlamp bulb on a second series Lancia Ypsilon. First, open and lift the bonne…
How to Replace the Main Beam Bulb in a Lancia Ypsilon Headlamp
How to Replace the Main Beam Bulb in a Lancia Ypsilon Headlamp
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Before starting, open the bonnet of your Lancia Ypsilon. Begin by unclipping and removing the inner cover of the blown bulb. Once done, rotate the ba…
Replacement of the license plate lights of the Lancia Ypsilon
Replacement of the license plate lights of the Lancia Ypsilon
Lancia Ypsilon (2011-2023 / 846, Ypsilon 3, Y3, MK 3) Today we will discover the main instructions that will allow us to disassemble and replace the license plate bulbs of the Lancia Ypsilon, in simple a…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos