Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to replace the high beam headlight bulb on a Lancia Ypsilon

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y2, 843, Ypsilon 2, MK 2 - Years 2003-2011
Part: Headlight bulb
Operation: How to replace the high beam headlight bulb on a Lancia Ypsilon

Before starting, we will have to open the front hood of our Lancia Ypsilon. So let's start by disengaging and removing the internal cover of the burnt out bulb. Once this is done, we will have to rotate the base of the burned out bulb anti-clockwise, and then extract it from its seat in the headlight. At this point, we will have to go to disconnect the power plug. When we have completed this step, we will have completed the disassembly. To fit the new bulb, all we have to do is follow these steps in reverse, and the replacement will be finished.


Posted on 2 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Ypsilon 2003-2011 - How do you replace the headlight bulb of the Lancia Ypsilon? Read Answer
    • Ypsilon 2003-2011 - What types of bulbs does the 2006 Lancia Ypsilon have? Read Answer
    • Ypsilon 2003-2011 - What sidelights does the 2007 Lancia Ypsilon mount? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos