Do it yourself
| ||||
|
Lancia Ypsilon - Video tutorial
Model: Lancia Ypsilon
Y2, 843, Ypsilon 2, MK 2
- Years 2003-2011 In this video we will see how to remove and replace the headlight bulb of a second series Lancia Ypsilon. First we open and lift the bonnet; then we unclip the rear plastic cover of the headlight and we go to unclip the tab of our bulb. At this point we are going to disconnect the electrical connector of the lamp and remove it, replacing it with the new one, as shown in the video. We assemble the new lamp, of the right type and with the same attachment, and apply the reverse procedure of the disassembly, following the video tutorial to the end!
Posted on 31 January 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |