Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Front Headlight in a Lancia Ypsilon

Model: Lancia Ypsilon Y2, MK 2, 843, Ypsilon 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight

See other generations:
Video tutorial

The selected video tutorial shows how to replace the front headlight in a second-generation Lancia Ypsilon. Open the bonnet and locate the light unit to be removed.

Unscrew the upper mounting screws of the headlight using a Torx key. To access the lower fixings, loosen the wheel arch screws and slightly move the front bumper away from the affected side. Once all mounting points are free, carefully pull the headlight forward to extract it. At the back, disconnect the electrical connectors of the bulbs.

Position the new headlight by connecting the connectors, insert it into the housing, and re-screw all mounting screws. Return the bumper to position and check the correct operation of the front lights.


Posted on 23 August 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulbs on a Lancia Ypsilon
Replacing the Headlight Bulbs on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) Replace the bulbs in the front headlight on a Lancia Ypsilon: open the bonnet by pulling the lever located at the bottom right of the dashboard, and …
How to Replace the Front Headlight Bulb on a Lancia Ypsilon
How to Replace the Front Headlight Bulb on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) To replace the front headlight bulb on a Lancia Ypsilon, first open the bonnet to access the components inside the engine bay. Here, you will locate …
Replacing Front Headlight Bulb on Lancia Ypsilon
Replacing Front Headlight Bulb on Lancia Ypsilon
Lancia Ypsilon (2003-2011 / Y2, MK 2, 843, Ypsilon 2) In this video, you will learn how to remove and replace the front headlight bulb on a second series Lancia Ypsilon. First, open and lift the bonnet; …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos