Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to replace the battery of the Fiat Lancia remote control.

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y3, 846, MK 3, Ypsilon 3 - Years 2011-2023
Part: Key
Operation: How to replace the battery of the Fiat Lancia remote control.

Today, with the help of this short video tutorial, we will explain how to replace the battery of the Fiat Lancia remote control. This operation is the same for all Fiat group remotes. Remove the cover with the help of a flat-head screwdriver, simply turn the screw located on the side of the remote and position it on the open lock symbol, as shown in the video. Once the cover is removed, extract the battery and insert the new one. The battery model is CR2032 with 3 volts. Insert the battery and the cover, then use the screwdriver to tighten the screw on the closed lock symbol, and you're done.


Posted on 14 December 2023 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Ypsilon 2011-2023 - Why does the Lancia Ypsilon Mk3 remote control no longer work correctly? Read Answer
    • Ypsilon 2011-2023 - Why does the Lancia Ypsilon central locking no longer work? Read Answer
    • Ypsilon 2011-2023 - What does the padlock light on my Lancia Ypsilon mean? Read Answer
    • Ypsilon 2003-2011 - How to open the fuel tank of the Lancia Ypsilon? Read Answer
    • Ypsilon 2003-2011 - Why doesn't the Lancia Y open? Read Answer
    • Ypsilon 2011-2023 - What does the light with the padlock on my Lancia Ypsilon indicate? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos