Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to replace the remote control battery of the New Lancia Ypsilon.

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y3, 846, MK 3, Ypsilon 3 - Years 2011-2023
Part: Key
Operation: How to replace the remote control battery of the New Lancia Ypsilon.

In this video tutorial you can see how it is possible to replace the remote control battery of the Lancia Ypsilon. To replace the battery of the New Lancia Ypsilon key, first of all you have to buy a 3V Cr 2032 flat battery, remember to always use quality material, so once you have the new battery available, proceed as follows: remove the cover plastics of the key. Unscrew the screw that blocks the plastic of the battery holder (Use a small slotted screwdriver). Press the button to release the metal key. Now hold the remote control of the key with one hand, and with the other insert a screwdriver on the side of the cover where the key is to be housed, now you have to pry up to detach the plastic that holds the battery. Insert the battery holder inside the remote control key Tighten the battery holder locking screw. Test the operation of the remote control by pressing the buttons.


Posted on 11 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Ypsilon 2011-2023 - Why does the Lancia Ypsilon Mk3 remote control no longer work correctly? Read Answer
    • Ypsilon 2011-2023 - Why does the Lancia Ypsilon central locking no longer work? Read Answer
    • Ypsilon 2011-2023 - What does the padlock light on my Lancia Ypsilon mean? Read Answer
    • Ypsilon 2003-2011 - How to open the fuel tank of the Lancia Ypsilon? Read Answer
    • Ypsilon 2003-2011 - Why doesn't the Lancia Y open? Read Answer
    • Ypsilon 2011-2023 - What does the light with the padlock on my Lancia Ypsilon indicate? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos