Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel Trims on a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Wheel

Want to replace the wheel trims on your car and don’t know how? Follow these steps to remove the trims: get a metal lever (screwdriver) and pry between the wheel and the trim until the metal clip (around the trim) detaches. Take the new trims and fit the metal part onto them (if detached), then secure them onto the wheel by applying pressure with your hands. Repeat the same operations for all the wheels on the car. Check the correct fitting of the trims to avoid unpleasant detachments.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Internal Fuse Box of the Lancia Ypsilon 2022
Where to Find the Internal Fuse Box of the Lancia Ypsilon 2022
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) To locate the internal fuse box of your new Lancia Ypsilon Mk3 (2022), follow these simple steps. First, park the car safely and turn it off complete…
How to Replace the Key Battery of a Lancia Ypsilon
How to Replace the Key Battery of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Begin by prying off and removing the "Lancia" emblem from your Lancia Ypsilon using a thin but sturdy tool. Then, using a cross-head screwdriver, uns…
How to Remove the Front Seat Folding Handle on a Lancia Ypsilon
How to Remove the Front Seat Folding Handle on a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) Before starting, open the front door of your Lancia Ypsilon. Begin by lowering and holding the seat folding handle, then unclip and move the internal…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos