Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Car stereo

Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the front section of the radio. This will release the internal clips of the radio, allowing you to pull it out from the dashboard. Once you have removed the radio from the dashboard, disconnect the rear electrical connectors. At this point, you can completely remove the radio, successfully completing the disassembly of the Lancia Ypsilon's radio.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Car Radio on Lancia Ypsilon
How to Remove the Car Radio on Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) How to remove the original car radio on a Lancia Ypsilon? Follow this guide carefully: to remove the radio from your Ypsilon, you do not need plastic…
How to Remove the Original Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) How do you remove the original radio from a second series Lancia Ypsilon? Let's carefully see in this video how to perform the disassembly. To remove…
How to Remove the Radio from a Lancia Ypsilon?
How to Remove the Radio from a Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you start, sit in the driver's seat of your Lancia Ypsilon. Begin by inserting the extraction keys into the designated holes on the front of t…

Other guides you may be interested in

    Frequently Asked Questions

    • Ypsilon 2011-2023 - Where is the blue & me control unit located in the Lancia Ypsilon? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos