Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Left Front Headlamp on the Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Headlight

In this video, you can see how to change the dipped beam lights on the Lancia Ypsilon and how to remove the headlamp. First, lift the bonnet and secure it; then engage first gear, apply the handbrake, and slightly loosen the wheels. Remove the wheel arch liner by unscrewing the screws with a cross screwdriver. Next, remove the bumper by taking out the clips. Use a 10mm socket to remove the internal screws (see video); once the bumper is removed, unscrew the three screws holding the headlamp; once the headlamp is removed, you can change the bulbs.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front headlamp of a Lancia Ypsilon
How to remove the front headlamp of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you can start, open the bonnet of your Lancia Ypsilon. Begin by loosening and moving the section of the front bumper near the headlamp, unscre…
Replacing the Front Headlamp Bulb on a Lancia Ypsilon
Replacing the Front Headlamp Bulb on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In today's tutorial, you will see how to remove and replace the front headlamp bulb on a second series Lancia Ypsilon. First, open and lift the bonne…
How to Replace the Main Beam Bulb in a Lancia Ypsilon Headlamp
How to Replace the Main Beam Bulb in a Lancia Ypsilon Headlamp
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before starting, open the bonnet of your Lancia Ypsilon. Begin by unclipping and removing the inner cover of the blown bulb. Once done, rotate the ba…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos