Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Lancia Ypsilon 3

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Headlight bulb

If the front headlight bulb of the Lancia Ypsilon were to burn out, let's change it as soon as possible to avoid a fine, but above all to drive safely. To do this, we open the hood of the engine compartment, stand in front of the headlight that contains the bulb to be changed, operating inside the hood we remove the rubber protection, remove the bulb and separate it from the electrical connector. We insert the new H7 into the connector, using gloves to avoid touching the bulb with our fingers, we put the assembly back into the reflector, respecting the correct orientation, and put the rubber protection back on.

Posted on 2 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Lancia Ypsilon
Replacing Front Headlight Bulb on Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In this video, you will learn how to remove and replace the front headlight bulb on a second series Lancia Ypsilon. First, open and lift the bonnet; …
How to Replace the Main Beam Bulb in a Lancia Ypsilon Headlamp
How to Replace the Main Beam Bulb in a Lancia Ypsilon Headlamp
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before starting, open the bonnet of your Lancia Ypsilon. Begin by unclipping and removing the inner cover of the blown bulb. Once done, rotate the ba…
How do you replace the front headlight bulb of the Lancia Ypsilon?
How do you replace the front headlight bulb of the Lancia Ypsilon?
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) The procedure for replacing the headlight bulb of the Lancia Ypsilon involves opening the hood so that access to the components inside the engine com…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos