Do it yourself
| ||||
|
Lancia Lybra - Video tutorial
Model: Lancia Lybra
MK 1
- Years 1998-2005 In order to replace the Lancia Lybra license plate light bulb, loosen the two screws located in the upper and lower part of the ceiling light, positioned on the left side of the license plate housing. In this way, the ceiling light can be extracted and the bulb inside it will have to be removed so that it can be replaced with a new one. Once the new bulb has been inserted, it will be possible to reinsert the ceiling light in its housing and fix it by screwing in the special screws removed previously.
Posted on 2 July 2022 by ScegliAuto
Other guides that may interest you
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |