|
Do it yourself
| |||
| ||||
How to unlock the air suspensions of a Range Rover
Model: Land Rover Range Rover
L322, MK 3
- Years 2002-2012
In this video we can see how to fix a common issue that can happen with Range Rovers, which is the suspension getting stuck: the compressor is located in the trunk, under the spare tire. The YouTuber purchased a used Range Rover compressor to replace the worn parts. The first thing we will do is disconnect the negative battery cable, then expose the compressor by removing the cover and disconnecting all the electrical wiring. There are four bolts on the sides that we will not completely remove, but just loosen, in order to remove the plate from its housing. We replace the compressor with the functioning one we purchased and reconnect all the electrical cables, then put the cover back on with the four bolts. We close all the doors and reconnect the negative battery terminal, then start the car and put the suspension in "normal" mode, and it is finally starting to work again.
Posted on 21 January 2025 by ScegliAuto
Video tutorial
Related tutorials
Land Rover Range Rover
(2002-2012 /
L322, MK 3)
The air suspension of the Land Rover Range Rover allows you to raise or lower the car's height depending on driving comfort or road conditions that n…
Land Rover Range Rover
(2012-2021 /
MK 2)
The management of the automatic suspension system in the Land Rover Range Rover Sport is controlled by a button located next to the automatic transmi…
Land Rover Range Rover
(2002-2012 /
L322, MK 3)
The following video will explain how to reset the tire suspension inactivity warning on the Range Rover L322. As the video explains, this is a very s…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.086
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
