Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Key Fob Battery for Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Key

In this video tutorial, you will learn how to disassemble and replace the battery in the key fob of a Range Rover Evoque. First, take your key fob and remove the side part to extract the key. Then, pry open the fob on the sides to separate it into two halves, as shown in the video. At this point, access the battery and remove it to replace it with a new one of the correct type (in this case, a CR 2032 3V). Finally, insert the new battery in the correct orientation and reassemble the key fob by reversing the procedure.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Evoque (2011-2018 / L538, MK 1) In this video, you will see how to disassemble and replace the battery of the key fob for a Land Rover Range Rover Sport, as well as the standard Ran…
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the battery in the key fob of a Land Rover Evoque, remove the chrome cover located on the side of the device. Underneath, you will find th…
Land Rover Evoque (2018-2026 / L551, MK 2) To replace the battery in the key fob of a Land Rover Evoque, slide off the chrome cover located on the side of the fob. Once this cover is removed, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos