Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Evoque
  6. : How do i replace the battery in the Land Rover Evoque remote control?

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 2, L551 - Years 2018-2024
Part: Key
Operation: How do i replace the battery in the Land Rover Evoque remote control?

In order to replace the battery of the Land Rover Evoque key, you need to remove the chrome cover located on the side of the remote control. Once this cover has been removed, the key underneath must also be removed, in order to divide the upper half of the remote control from the lower one. After opening the remote control, the battery can be removed from its compartment and replaced with a new spare part. Once the new battery has been inserted, it will be possible to close the two halves of the remote control, insert the key and replace the chrome cover.


Posted on 8 March 2024 by ScegliAuto



How do i replace the battery in the Land Rover Evoque remote control?
Land Rover Evoque (2011-2018 / MK 1, L538) To replace the Land Rover Evoque remote control battery, you must first open the remote control. It will be necessary to remove the chrome cover with
How do you replace the battery of the Land Rover Evoque remote control?
Land Rover Evoque (2011-2018 / MK 1, L538) In order to replace the battery of the Land Rover Evoque remote control, you need to detach the chrome trim located on the side of the device: once t
Land Rover Range Rover Evoque key battery replacement
Land Rover Evoque (2011-2018 / MK 1, L538) In this video we will see how to remove and replace the remote control key battery of a Land Rover Range Rover Sport, but also on the normal Range Ro

    Frequently Asked Questions

    • Evoque 2011-2018 - Why doesn't my Land Rover Evoque remote control work? Read Answer
    • Evoque 2011-2018 - Why does the Range Rover Evoque key not work? Read Answer
    • Evoque 2011-2018 - How much does a Range Rover Evoque remote control battery cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos