Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in a Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

To replace the remote battery in a Land Rover Evoque, first open the remote. Remove the chrome cover with the RANGE ROVER lettering to insert a lever tool into the gap that separates the two halves of the remote.

Now the battery will be accessible and can be replaced after removing the black plastic piece that holds it in place. Once the new battery is inserted into its compartment, close the two halves of the remote and reinstall the previously removed chrome cover.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery for the Land Rover Evoque?
How to Replace the Key Fob Battery for the Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To replace the key fob battery for the Land Rover Evoque, detach the chrome cover located on the side of the device. Once the cover is removed, you c…
How to Replace the Key Fob Battery on a Land Rover Evoque?
How to Replace the Key Fob Battery on a Land Rover Evoque?
Land Rover Evoque (2018-2026 / MK 2, L551) To replace the battery in the key fob of a Land Rover Evoque, slide off the chrome cover located on the side of the fob. Once this cover is removed, …
How to Replace the Remote Battery in a Land Rover Evoque 2
How to Replace the Remote Battery in a Land Rover Evoque 2
Land Rover Evoque (2018-2026 / MK 2, L551) To replace the battery inside your second-generation Land Rover Evoque remote, follow the steps described below. First, purchase a CR2032 battery, th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos