Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Lexus UX -

Lexus UX (2018-2026 / mk 1)

Lexus UX (2018-2026 / MK 1)
How to reset the tire pressure light in the Lexus UX 200?
In this tutorial, we can see how to reset the tire pressure light in the Lexus UX 200, an extremely simple and quick operation, to be done only once the …Read all…
Posted on 30 August 2025 by ScegliAuto
Lexus UX (2018-2026 / MK 1)
How to reset the tire pressure sensor of a Lexus UX 240h?
To reset the tire pressure warning light on a Lexus UX 240h, start by turning on the instrument panel without starting the engine. Use the buttons on the …Read all…
Posted on 19 September 2024 by ScegliAuto
Lexus UX (2018-2026 / MK 1)
How to reset the tire pressure light on the Lexus UX 200?
In this tutorial, we can see how to reset the tire pressure light in the Lexus UX 200, a very simple and quick operation. Before doing this, we must have …Read all…
Posted on 14 August 2024 by ScegliAuto
Lexus UX (2018-2026 / MK 1)
How to Reset the Tyre Warning Light on the Lexus UX 200?
In this tutorial, you will see how to reset the tyre warning light on the Lexus UX 200, a very simple and quick operation to perform only after restoring the …Read all…
Posted on 7 September 2026 by ScegliAuto
Battery (1) Key (7) Onboard computer (1) Checks and maintenance (1) Air filter (1) Cabin air filter (1) Brake pads (1) Fuse box (1) Warning light – error code (1) (4) Service warning light (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos