Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb

Model: Lexus GS - Years 1997-2004
Part: Headlight bulb

It can happen that the bulb in your car burns out, and in that case, it needs to be replaced. If you want to save money on an auto electrician, you can proceed with a DIY approach. The following guide shows how to correctly change the bulb in your car. You will need a new bulb and a screwdriver. Once you have removed the faulty bulb, open the bonnet and you will notice two screws and a tab; unscrew them and pull the tab so that the headlamp protrudes slightly to create space for the bulb replacement. Next, unscrew the cap connected to the connector and the bulb itself, disconnect it, and replace it with a new, functioning bulb. Once the bulb is connected, screw the cap back on, push the tab forward so that the headlamp returns to its original position, and tighten the screws to finish.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Front Headlight Restoration
Lexus GS (2005-2011 / S190) Due to weather conditions, sunlight, car wash detergents, and the aging of the material itself, headlights tend to become cloudy, making them not onl…
Replacement of Upper Suspension Wishbone
Replacement of Upper Suspension Wishbone
Lexus GS (1997-2004 / ) The upper wishbone of the front suspension consists of a ball joint connected to an extension of the hub support and two bushes with a silent block c…
How to replace the battery of the 2009 Lexus GS car remote control
How to replace the battery of the 2009 Lexus GS car remote control
Lexus GS (2005-2011 / S190) Today we will explain how to replace the battery of the key fob for a 2009 Lexus GS 460. The battery we will use for the replacement is a CR 16 22. T…

How to Remove the Rear Wiper Blade on a Citroen C3

This guide shows you how to remove and replace the rear wiper blade on a Citroen C3. Grasp the rear wiper blade with your hands, gently pull the rubber from the moving blade (without breaking it), and slide it off the arm on the left. Fit the new wiper rubber onto the arm (if the rubber is original, you may need to adjust the length by cutting it as shown). Finally, lower the wiper arm onto the rear window and test the new blade by activating the rear wiper. It is always preferable to use original parts for better durability and quality.

Watch the video!


by ScegliAuto

More videos