Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the 2009 Lexus GS car remote control

Model: Lexus GS S190 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Key

See other generations:
Video tutorial

Today we will explain how to replace the battery of the key fob for a 2009 Lexus GS 460. The battery we will use for the replacement is a CR 16 22. To replace the battery, we first need to extract the emergency metal key contained inside the key fob by pressing the button on the side.

Insert the key into the key fob and apply slight pressure upwards to open it and remove the battery compartment.

Pay attention to the microchip that is lifted along with the battery during the replacement. After replacing the battery, close the key fob and insert the metal key inside.


Posted on 1 November 2025 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for the Lexus GS
Replacing the Key Fob Battery for the Lexus GS
Lexus GS (2005-2011 / S190) The following steps will guide you on how to dismantle and replace the battery in the key fob for the Lexus GS. First, take your key fob and start by…
How to Replace the Battery in the Lexus GS 350 Key
How to Replace the Battery in the Lexus GS 350 Key
Lexus GS (2011-2020 / L10) If you want to change the battery in the remote key for this car model, the description below details all the steps required for the replacement, and…
How to Change the Battery on the Lexus
How to Change the Battery on the Lexus
Lexus GS (2005-2011 / S190) Are you ready to replace the battery on this car model? In the description below, all the necessary information and steps for a safe replacement are …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos