Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery for the Lexus GS

Model: Lexus GS S190 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Key

See other generations:
Video tutorial

The following steps will guide you on how to dismantle and replace the battery in the key fob for the Lexus GS. First, take your key fob and start by removing the physical key located inside; then remove the plastic back cover and unscrew the screws of the battery compartment cover, as shown in the video.

At this point, install the new battery of the correct type and with the same code; insert it in the correct orientation and reassemble the key fob, finally reinserting the physical key to complete the operation!


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to replace the battery of the 2009 Lexus GS car remote control
How to replace the battery of the 2009 Lexus GS car remote control
Lexus GS (2005-2011 / S190) Today we will explain how to replace the battery of the key fob for a 2009 Lexus GS 460. The battery we will use for the replacement is a CR 16 22. T…
How to Replace the Battery in the Lexus GS 350 Key
How to Replace the Battery in the Lexus GS 350 Key
Lexus GS (2011-2020 / L10) If you want to change the battery in the remote key for this car model, the description below details all the steps required for the replacement, and…
How to adjust the time in the Lexus GS 350?
How to adjust the time in the Lexus GS 350?
Lexus GS (2011-2020 / L10) In this tutorial we can see how to adjust the time in the Lexus GS 350, an extremely simple and quick operation, to be carried out for example after …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos